Master Edition analog

Analog Interconnect

The EnKlein Master Edition Concierge (ME) analog cabling represents a fundamental reimagining of signal transmission—engineered not as embellished wire but as a precision-calibrated transmission system that establishes an unmistakable performance threshold beyond that of conventional high-end cables.

At its foundation lies a meticulously developed, stratified dielectric matrix that physically isolates each conductor from the turbulent near-field zone where electromagnetic interactions remain unstable and incomplete. This critical region is where delicate analog information suffers the most degradation. Through exacting control of these field dynamics, the ME virtually eliminates the temporal smearing, textural artifacts, and micro-level distortion that compromise even premium-tier cables.

The proprietary RJ420X treatment, applied to each assembly, serves as a comprehensive noise-rejection system that addresses both radiated and coupled interference across the entire electromagnetic spectrum. By systematically neutralizing destructive energy before signal contamination occurs, it creates an unprecedentedly stable transmission environment.

The outcome is not tonal coloration, but a demonstrably purer, more coherent signal path that allows your components to reach their inherent performance ceiling.

Crafted as a supple, entirely hand-assembled instrument, the ME is designed for systems—and listeners—capable of revealing its profound advantages: the removal of electronic artifice, heightened realism, expanded spatial dimensionality, and an effortlessly immersive musicality that remains utterly convincing through extended listening sessions across every musical genre.

Speaker Cables

Power Cables

Specifications

Conductor Architecture

Primary Signal Conductors: 18 AWG ultra-pure silver (99.99% minimum purity)
Secondary Matrix: 16 AWG silver lattice geometry
Construction: Precision woven three-dimensional lattice configuration
Total Conductor Count: 16 discrete silver elements per individual constructs
Conductor Treatment: MIL-STD-810G + thermal stabilization cycle (-50c to +70c)

Dielectric System

Primary Insulation: Multi-layer PTFE (Teflon) with controlled air-gap spacing
Inter-Conductor Barrier: Proprietary low-permittivity composite (ε < 2.1)
Overall Jacket: Flexible IP66 rated non magnetic outer sheath with integrated mechanical damping

Shielding & Noise Rejection

Primary Shield: Multi-layer etectic steel spiral wrapping (99% optical coverage)
Secondary Shield: Conductive polymer barrier layer
Tertiary Shield: High conductivity silver impregnated cloth
RJ420X Cathodic LCR Network: Applied to all conductor assemblies and termination zones
Rejection Performance: >110 dB (10 Hz - 100 MHz) typical for impulse response

RCA Configuration:

Connectors: Furutech CF-102 NCF (R) / CF-202 NCF (R)
Contact Material: Rhodium-plated α (Alpha) pure copper
NCF Treatment: Nano Crystal² Formula integrated into connector body
Locking Mechanism: Precision-machined collet compression system
Contact Resistance: <3 mΩ
Capacitance: 340 pF/meter (typical)
Inductance: 0.07 µH/meter (typical)
DC Resistance: <0.014 Ω/meter
Dielectric Constant: < 2.15
Velocity of Propagation: >69% (relative to speed of light)
Frequency Response: DC to >5 MHz (-0.1 dB)Cable Diameter: 25mm nominal

XLR Configuration:

Connectors: Furutech FP-601M/602F NCF (R)
Contact Material: Rhodium-plated α (Alpha) pure copper
NCF Treatment:
Shell: Non-magnetic stainless steel with carbon fiber NCF composite
Pin Configuration: AES/EBU standard (Pin 2 hot)
Contact Resistance: <2.5 mΩ per pin
Capacitance: 1000 pF/meter (typical)
Inductance: 0.025 µH/meter (typical)
DC Resistance: <0.005 Ω/meter
Dielectric Constant: < 2.15
Velocity of Propagation: >69% (relative to speed of light)
Frequency Response: DC to >5 MHz (-0.1 dB)Cable Diameter: 25mm nominal

Electrical Performance

Velocity of Propagation: >69% (relative to speed of light)
Frequency Response: DC to >5 MHz (-0.1 dB)

Available Lengths

1.5m, 2.0m, 3.0m (custom lengths available upon request)

Construction:

Entirely hand-assembled in dedicated environment with individual serial numbering and certification.

‍Master edition analog interconnects

‍The Evolution of reference product engineering