Master Edition Phono cable

Analog Interconnect

The EnKlein Master Edition Phono cable represents a breakthrough in ultra-low-level signal transmission—engineered not as decorated wire, but as a precision-calibrated electromagnetic pathway that immediately distinguishes itself from even the most acclaimed reference phono cables.

At its foundation lies a meticulously developed, stratified dielectric matrix specifically engineered for the extreme demands of phono cartridge output. Delicate signals are measured in the microvolt range and operate in the most electrically hostile environment of any analog source. This advanced shielding system physically isolates each conductor from the turbulent near-field zone, where electromagnetic interactions remain chaotic and incomplete. In the phono domain, where the weakest signals in your entire system are most susceptible to degradation, this isolation is critical.

Master Edition meticulously controls these field dynamics at the molecular level, virtually eliminating the temporal smearing, textural hardness, and micro-level distortions that can affect even five-figure phono cables.

The proprietary RJ420X Cathodic protection network, applied in parallel with each conductor assembly, is a comprehensive noise-rejection system. It addresses both radiated and coupled interference throughout the entire electromagnetic spectrum—from subsonic rumble to RF contamination. Proactively neutralizing destructive energy before it contaminates the signal ensures an exceptionally quiet transmission environment, preserving the cartridge's delicate nuances in their purest form. The outcome is not tonal coloration or euphonic enhancement, but a demonstrably purer, more stable signal path that allows your cartridge and phono stage to reach their inherent performance ceiling—revealing resolution, dynamics, and timbral accuracy previously masked by cable-induced artifacts.

Crafted as a supple yet mechanically inert, entirely hand-assembled instrument with graduated flexibility engineered to impose zero mechanical loading on the tonearm, SHT Master Edition Phono is designed for systems—and listeners—capable of revealing its profound advantages: the complete absence of electronic grain, startling retrieval of low-level detail, holographic spatial dimensionality, explosive yet refined dynamics, and an effortlessly immersive musicality that transforms vinyl playback into a revelatory experience, remaining utterly convincing through extended listening sessions across every musical genre from intimate chamber works to full orchestral passages.

Speaker Cables

Power Cables

Master Edition Concierge

Conductor Architecture

Primary Signal Conductors: 18 AWG ultra-pure silver (99.99% minimum purity)
Secondary Matrix: 16 AWG silver lattice geometry
Construction: Precision woven three-dimensional lattice configuration
Total Conductor Count: 16 discrete silver elements per individual constructs
Conductor Treatment: MIL-STD-810G + thermal stabilization cycle (-50c to +70c)

Dielectric System

Primary Insulation: Multi-layer PTFE (Teflon) with controlled air-gap spacing
Inter-Conductor Barrier: Proprietary low-permittivity composite (ε < 2.1)
Overall Jacket: Flexible IP66 rated non magnetic outer sheath with integrated mechanical damping

Shielding & Noise Rejection

Primary Shield: Multi-layer etectic steel spiral wrapping (99% optical coverage)
Secondary Shield: Conductive polymer barrier layer
Tertiary Shield: High conductivity silver impregnated cloth
RJ420X Cathodic LCR Network: Applied to all conductor assemblies and termination zones
Common Mode rejection > 95 dB
Rejection Performance: >125 dB (10 Hz - 100 MHz) typical for impulse response

Critical phono characteristics

Capacitance: 38 pF/meter (total cable capacitance critical for cartridges)
Inductance: 0.28 µH/meter (optimal RIAA tracking)
DC Resistance: <0.006 Ω/meter

RCA & DIN Configuration:

Connectors: Furutech CF-102 NCF (R) / CF-202 NCF (R)
Contact Material: Rhodium-plated α (Alpha) pure copper
NCF Treatment: Nano Crystal² Formula integrated into connector body
Locking Mechanism: Precision-machined collet compression system
Contact Resistance: <3 mΩ
Inductance: 0.08 µH/meter (typical)
DC Resistance: <0.0054 Ω/meter
Dielectric Constant: < 2.15
Velocity of Propagation: >69% (relative to speed of light)
Frequency Response: DC to >5 MHz (-0.1 dB)Cable Diameter: 25mm nominal

XLR Configuration:

Connectors: Furutech FP-601M/602F NCF (R)
Contact Material: Rhodium-plated α (Alpha) pure copper
NCF Treatment:
Shell: Non-magnetic stainless steel with carbon fiber NCF composite
Pin Configuration: AES/EBU standard (Pin 2 hot)
Contact Resistance: <2.5 mΩ per pin
Inductance: 0.22 µH/meter (typical)
DC Resistance: <0.0042 Ω/meter
Dielectric Constant: < 2.15
Velocity of Propagation: >69% (relative to speed of light)
Frequency Response: DC to >5 MHz (-0.1 dB)Cable Diameter: 25mm nominal

Physical Characteristics

Minimum Bend Radius: 75mm
Jacket Color: Matte black with discrete leather identification bands
Weight: 750g/meter (RCA), 1050g/meter (XLR)
Temperature Range: -40°C to +85°C operational
Flexibility Rating: Superior (hand-crafted layering for drape optimization)

Electrical Performance

Velocity of Propagation: >69% (relative to speed of light)
Frequency Response: DC to >5 MHz (-0.1 dB)

Available Lengths

1.5m, 2.0m, 3.0m (custom lengths available upon request)

Construction:

Entirely hand-assembled in dedicated environment with individual serial numbering and certification.

‍Master edition Phono interconnects

‍The Evolution of reference product engineering